
P6 6" Inline Fan with Speed Control
- 6-inch inline duct fan, model VSV-IFP6C.
- Up to 345 CFM of airflow at up to 3000 rpm.
- EC brushless motor rated at 22 W.
- Rated noise level of 32 dB(A).
- Stepless dial speed controller for fine adjustment.
Shop now opens the 6" P6. The same line also comes as a 4" P4 (130 CFM) and an 8" P8; check the size you pick before you order.
About the P6 6" Inline Fan with Speed Control
The P6 is VIVOSUN's 6-inch inline duct fan for grow tents and small rooms that need stale, warm air pulled out. It moves up to 345 CFM on an EC motor that draws 22 watts, and VIVOSUN rates it at 32 dB(A).
Speed is set with a stepless dial controller, so you aren't stuck choosing between low, medium and high. That matters in a tent: you can run the fan hard while the lights are on and the tent is warm, then turn it down when the lights go off instead of switching it off completely.
The housing is ABS plastic with PBT blades, both chosen to resist warping in warm, humid air. The power adapter accepts a wide voltage range and runs the fan at low voltage, and stall protection stops the motor if the blades jam. The fan mounts to a wall, a ceiling or straight onto a duct opening.
At 7.28 × 5.83 × 5.83 inches it is compact for a 6-inch fan. VIVOSUN's own fan-size chart pairs a 6-inch fan with its 4x4 (48 × 48 × 80 in) and 3x4 tents, and the matching 6" Carbon Filter is built for the same duct size.
Features
- 6-inch inline duct fan, model VSV-IFP6C.
- Up to 345 CFM of airflow at up to 3000 rpm.
- EC brushless motor rated at 22 W.
- Rated noise level of 32 dB(A).
- Stepless dial speed controller for fine adjustment.
- ABS housing and PBT blades that resist deformation.
- Wide-voltage adapter, low-voltage operation and stall protection.
- Mounts on walls, ceilings or duct openings; 7.28 × 5.83 × 5.83 in.
Pros and cons
Pros
- Enough airflow for a 4x4 tent by VIVOSUN's sizing chart, in a small body.
- Low draw for a fan that may run most of the day.
- The dial makes the night-time step-down simple.
Cons
- No app or Wi-Fi control; speed is set by hand at the dial.
- Rated 345 CFM is a free-air figure; a filter, long ducting and bends all cut real airflow.
- Ducting, clamps and a carbon filter are not part of this product.
Who it fits
Growers setting up or upgrading a 4x4 or 3x4 tent who want a quiet, low-draw exhaust fan with simple manual control. It also suits a small grow room, a basement corner or a workshop that needs fumes moved out through a 6-inch duct.
How it fits the range
Pair it with the 6" Carbon Filter for odor control on the exhaust side, and add a clip fan such as the AeroWave E6 Gen2 or AeroWave A6 to stir the air around the canopy. In a humid room, the AeroDrain D12 Dehumidifier handles the moisture a fan alone can't. The fan and filter setup guide walks through the whole system, and Grow Tent Sizes shows which fan size each tent calls for.