Shop the S448
6" Carbon Filter with Pre-Filter image 1
Lights, Fans & Climate

6" Carbon Filter with Pre-Filter

  • 6-inch flange for 6-inch inline duct fans, intake or exhaust setups.
  • Maximum rated airflow 413 CFM.
  • 38 mm bed of RC 412 Australian virgin charcoal, 1200+ IAV.
  • Dual-sided galvanized steel mesh with round holes for open airflow.
  • Detachable pre-filter cloth that blocks 99% of particles.

Size / version

Shop now

Shop now opens the 6" basic filter with round-hole mesh. A 4" (223 CFM) and an 8" version are sold separately, as is a Pro line with hexagon holes and ring anchors.

About the 6" Carbon Filter with Pre-Filter

This is VIVOSUN's 6-inch activated carbon filter, the canister that sits on the intake side of a 6-inch inline fan and strips odors and gaseous compounds out of the air before it leaves the tent. VIVOSUN rates it for a maximum airflow of 413 CFM, which leaves headroom above a 6-inch fan like the P6.

The bed is 38 mm of RC 412 Australian virgin charcoal at 1200+ IAV, a measure of how much the carbon can adsorb. Both sides of the bed are held by galvanized steel mesh with round holes, which opens up more of the surface for air to pass through, and the canister is lengthened for more contact time.

A detachable pre-filter cloth wraps the outside and catches dust before it reaches the carbon; VIVOSUN says it blocks 99% of particles. Because the cloth is separate from the canister, the carbon underneath stays cleaner for longer.

The flange and base are heavy-duty iron and they swap ends. Turning the canister around exposes fresh carbon to the airflow, which helps stretch its service life. Two hanging straps come in the box so you can hang the filter from the tent's top bars. The canister measures 8.85 × 8.85 × 15.75 inches and weighs 6.5 pounds.

Features

  • 6-inch flange for 6-inch inline duct fans, intake or exhaust setups.
  • Maximum rated airflow 413 CFM.
  • 38 mm bed of RC 412 Australian virgin charcoal, 1200+ IAV.
  • Dual-sided galvanized steel mesh with round holes for open airflow.
  • Detachable pre-filter cloth that blocks 99% of particles.
  • Reversible iron flange and base to extend service life.
  • Pair of hanging straps included.
  • 8.85 × 8.85 × 15.75 in; 6.5 lb.

Pros and cons

Pros

  • Rated 413 CFM sits above the P6 fan's 345 CFM, so the filter is sized with headroom.
  • Reversible canister gets more use out of the same carbon.
  • Detachable pre-filter keeps dust off the charcoal.

Cons

  • At 6.5 pounds it needs a solid top bar or strap point.
  • Any carbon filter adds resistance; VIVOSUN plans for about 60% more fan capacity when one is used.
  • The basic model has no ring anchors; a Pro version adds them.

Who it fits

Anyone running a 6-inch exhaust fan in a 4x4 or 3x4 tent, a closet or a small room who wants smells kept inside. It also works in a kitchen or basement setup that needs a 6-inch carbon stage.

How it fits the range

The natural partner is the P6 6" Inline Fan, which matches the flange size. For the order of parts (filter, fan, ducting, intake), see the fan and filter setup guide. If humidity is the bigger problem than smell, look at the AeroDrain D12 Dehumidifier.

6" Carbon Filter with Pre-FilterShop now